With 3 PSI internal, audible, safety pop-off alarm. Rigid and durable wing nut and lid. Unique, hand-dipped, soft plastic diffuser. Inlet nipple, stem and diffuser bonded into a single unit. Soft, translucent, double helix thread jar. Latex-free. 8" connector tubing not included.
Manufacturer: Salter Labs
Order / Info Request
High Flow Humidifier, 6-15 LPMA new pressure relief valve and all new down spout with 360 degree rectangular diffuser ports reduces water turbulence and operates quietly. It allows High Flow delivery rates of 6-15 LPM. This Humidifier is specifically suited for applications where delivery via face mask or the Salter-Style ® 1600HF Cannula require high flow rates to maintain desired blood oxygen saturation levels.Ideal for use with new generation high capacity output oxygen concentrators where flow rates up to 15 LPM are available.
Rectangular diffuser ports provide quiet operation with low system back pressure and a 6 PSI pop-off alarm. new dome lid design incorporates improvements, resulting in high performance iwth rugged durability. Ideal for use with all oxygen sources: concentrator, liquid, tank, wall outlet.
Preset audible alarm at 4psi pressure relief.
Manufacturer: Hudson RCI
Disposable, durable plastic. Unique diffuser designed to provide patient with comfortable, therapeutic humidity and minimal noise. Defined maximum and minimum water level lines. Recessed nipple reduces possibility of breaking off outlet connection. Holds 380 ml. Preset audible alarm at 4 psi pressure relief.
Weighing just two ounces, this durable, self-contained unit delivers an accurate pulse rate and blood oximetry in just seconds.
Manufacturer: Respironics
Under-the-chin design for excellent fit on a wide variety of face sizes Clear, soft vinyl for patient comfort and visual patient assessment Adjustable nose clip assures comfortable fit Complete with 7 feet oxygen supply tubing.
Under-the-chin design for excellent fit on a wide variety of face sizes. Clear, soft vinyl for patient comfort and visual patient assessment. Adjustable nose clip assures comfortable fit. Complete with 7 feet oxygen supply tubing.
Low-resistance check valves prevent rebreathing and allow exhaled gas to escape. Safety vent allows entrainment of room air. Clear, soft vinyl for patient comfort and visual patient assessment. Complete with 7-ft. oxygen supply tubing.
Disposable drainage bag with tee adaptor which accepts standard 22mm I.D. corrugated tubing. 750cc bag capacity. Self-locking plastic chain secures bag to a stable object.Convenient drainage port.
AQUAPAK Prefilled Humidifiers combine an easy-to-use adaptor with choice of two sterile water reservoir bottle sizes.Micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adaptors incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.
Micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. 340mL, with Sterile Humidifier Adapter.340 mL
Clear, soft vinyl for patient comfort and visual patient assessment. Adjustable nose clip assures comfortable fit. Complete with 7 feet oxygen supply tubing. Comes in adult and pediatric sizes.
; Telescoping Handle to fit D & E Cylinders.
Manufacturer: The Aftermarket Group
A special cannula designed to give both adult and pediatric users of dual port oxygen conservationdelivery systems all the comfort and conveniences of a Salter-Style® cannula. Unique dual tubingdelivers oxygen on demand through one tube while inspiratory/expiratory effort is sensed through the other tube.
This cannula has a dual tubing and a permanent face piece barrier for use with a dual port style oxygen conserver device. One side of the tubing senses patient inhalation and the second tube delivers oxygen to the other nostril. This cannual meets the specifications of all dual port oxygen conserving devices. Tubing lengths are limited to assure optimum performance.
Can be used with most hand-held nebulizers for aerosol therapy. Adjustable nose clip for comfort fit. Individually packaged, 50 per caseUnder the chin style.Pediatric
Delivers safe, low/moderate concentrations of oxygen for extended periods of time. Curved, nonflared tip. Comes with 7' kink-resistant supply tubing.
Manufacturer: Invacare
Kink-resistant. Use while ambulating.50'
Kink-resistant. Use while ambulating.21'
Soft, closed-cell foam tube cushions that slide over the head or face tube of an oxygen cannula. This will provide a cushion to reduce chafing or pressure to the sensitive tissue in the over the ear area.
Under-the-chin design for excellent fit on a wide variety of face sizes. Clear, soft vinyl for patient comfort and visual patient assessment. Adjustable nose clip assures comfortable fit. Complete with 7 feet oxygen supply tubing. Available in Adult & Pediatric Sizes.
For high-humidity aerosol therapy Distinctive under-the-chin design made of clear, soft vinyl offers patient comfort and ease of speech. Accepts 22mm I.D. tubing. Does not include tubing.
For high-humidity aerosol therapy Distinctive under-the-chin design made of clear, soft vinyl offers patient comfort and ease of speech. Accepts 22mm I.D. tubing.
Airsep Portable Oxygen Concentrator. Light weight and portable. Accepted by most large airlines.
Manufacturer: Airsep Corp
HME CombinationsA wide varity of convenient prepackaged flex tube/HME combinations are available to meet every humidificton and patient need.Each combination includes one HME and one flex tube See chart for available combinations and case quantities All configurations individually packaged
A new pressure relief valve and down spout diffuser design allows High Flow delivery (6-15 LPM). This humidifier is specifically suited for applications where delivery via face mask or the new Salter-Style 1600HF Cannula require high oxygen flow rates to maintain desired oxygen saturation. Ideal for use with new generation high capacity output oxygen concentrators, wall outlet source gas or other applications where flow rates up to 15 LPM are required.
Manufacturer: Allied Healthcare Products Inc.
The compact HomeFill II revolutionizes ambulatory oxygen by allowing patients to fill their own cylinders from their Invacare® 5-liter concentrator. With HomeFill II, providers virtually eliminate cylinder deliveries, reducing costs by three-to-one, and patients enjoy their freedom and independence with an unlimited supply of ambulatory oxygen. The HomeFill II Oxygen Filling System allows the patient to breathe at home from a continuous flow concentrator and then use a convenient ambulatory pack when they are “out and about.” The Patient Convenience Pack available for the HomeFill II uses the latest in integrated pneumatic conserving technology for a 3.7-to-1 ratio while remaining lightweight. This new cylinder combines all the patient independence and provider cost savings realized with the HomeFill II delivery model plus carefree convenience and simplicity. The convenience pack (available in ML6 an M9 sizes) requires no batteries, no cumbersome connection tubes, and uses a standard single lumen cannula. It allows the patient to quickly fill an ambulatory cylinder and go where they want, when they want.
Standard 22mm O.D. connections.
Barbed hose and adaptor for standard D.I.S.S. threaded oxygen outlets.
Manufacturer: Passy-Muir
Flexible, contoured lip tab provides a high level of patient comfort Over-the-ear design provides a comfortable and secure fit Offered with standard (nonflared) or flared nasal tips Available with standard or universal connector and standard or crush-proof STAR LUMEN tubing in a variety of lengths
Flexible, contoured lip tab provides a high level of patient comfort. Over-the-ear design provides a comfortable and secure fit. Offered with standard (nonflared) or flared nasal tips.
Soft, odorless vinyl. Medium concentration with 7' tubing. Under-the-chin style.
Hudson RCI is available in a variety of lengths and configurations to meet the needs of patients and clinicians in all care settings.Distinctively designed STAR LUMEN tubing features a channeled inner lumen to resist kink and occlusion. STAR LUMEN tubing is now available in a distinctive green tint color to make it more visible against certain background colors. Oxygen tubing comes with a standard connector on one end and either a standard or universal connector on the other end. Universal connectors attach directly onto the flowmeter eliminating the need for separate adapters.
Couples oxygen supply tubing utilizing 5mm to 7mm end connectors
Couples oxygen supply tubing utilizing 5mm to 7mm end connectors.
Crush resistent . Seven feet long. Disposable.
Used to connect longer lengths of tubing either together or to a nasal cannula to allow more freedom of movement without interrupting oxygen flow.
The Percent-O2-Lock® air entrainment oxygen mask includes a rotating sleeve, opening and closing an airentrainment window. This provides the ability to deliver seven fixed oxygen concentrations to a spontaneously breathing patient. Concentration levels are easily dialed and locked in. The “dial in” air entrainment assembly is affixed to a standard aerosol mask. A high humidity adaptor permits use of a nebulizer with mask if prescribed.
The Percent-O2-Lock® air entrainment oxygen mask includes a rotating sleeve, opening and closing an air entrainment window. This provides the ability to deliver seven fixed oxygen concentrations to a spontaneously breathing patient. Concentration levels are easily dialed and locked in. The “dial in” air entrainment assembly is affixed to a standard aerosol mask. A high humidity adaptor permits use of a nebulizer with mask if prescribed.
A leak proof, silky smooth 360 degree fully rotating tubing connector. It provides that extra margin of comfort and safety by isolating and protecting the cannula wearer from twisting, tuggin, kinking connecting tubing.
Comfort with everyday performance up to 6 LPM and a multitude of three channel crush resistant or smooth bore tubing lengths.
Comfort with everyday performance up to 6 LPM and a multitude of three channel crush resistant or smooth bore tubing lengths. Available in 4', 7', and 12' lengths.
Clear cannula with 7' supply tube. Clear, lightweight cannula with unique one piece anatomical design. Eliminates the need for flap, which can cause irritation. The result is maximum patient comfort. Over-the-ear style ensures secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing .
Clear cannula with 4 ' and 7' supply tube. Clear, lightweight cannula with unique one piece anatomical design. Eliminates the need for flap, which can cause irritation. The result is maximum patient comfort. Over-the-ear style ensures secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing .
Clear, lightweight nasal cannula with unique, one-piece, anatomical design. Eliminates the need for flap, which can cause irritation resulting in maximum patient comfort. Over-the-ear style ensures secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing or smooth bore tubing in various lengths. Latex-free.w/7' supply tubingSafety channel
Made with feather light components for comfort and to reduce behind th ear pressures. The diminutive, streamlined design and clear material is almost invisible on the skin. Great for the active Low Flow user.....up to 3 LPM>
The "Micro" Cannula (for use with 3 lpm or less of oxygen) provides superior comfort for the active, low-flow user. Clear, lightweight nasal cannula with unique, one-piece, anatomical design, eliminates the need for flap which can cause irritation, providing maximum patient comfort. Over-the-ear style provides secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing. Latex-free. w/7' supply tubing
Clear, lightweight cannula with unique one piece anatomical design, eliminates the need for flap which can cause irritation, providing maximum patientcomfort. Over-the-ear style provides secure positioning, allowing complete freedom of movement. Provided with three-channel safety tubing.
Special design has three inside channels that help prevent the tubing from becoming occluded. Ideal for home patients where long lengths can cause a potential kinking problem. Available in various lengths. Latex-free. 3/16" I.D.7'
Special design has three inside channels that help prevent the tubing from becoming occluded. Ideal for home patients where long lengths can cause a potential kinking problem. Available in various lengths. Latex-free. 3/16" I.D.25'
Special design has three inside channels that help prevent the tubing from becoming occluded. Ideal for home patients where long lengths can cause a potential kinking problem. Available in various lengths. Latex-free. 3/16" I.D.50'
Plastic swivel connector eliminates twisting, tangling and kinking of oxygen tubing. Latex free.
Disposable 500ml humidifier. Meets criteria for gas humidification. (Use with O2 concentrator.)
Traps condensed water in small bore tubing/nasal cannula.
Holds D or E size oxygen cylinders. Bolts to wheelchair with two U-bolts.
Manufacturer: Falls Welding & Fabricating